PT. PERTAMINA (Persero)
H2S Abatement Unit in LNG Plant
- Factors to be considered in designing H2S Abatement Unit in LNG Plant Project.
Abstract

Sulfur Recovery Engineers
Sulfur Recovery Unit Shutdown Procedures
- Sulfur Recovery Engineering (SRE) offers insights of importance of SRU shutdown: what is to be accomplished; types including a fuel gas sweep procedure; safety concerns; what not to do; hazard ID; lessons learned from near misses, mistakes and mishaps.

BSDT Seminars
Amine System Contamination:
Causes and Prevention
- Contaminants accumulate until steps are taken to remove them. This addresses the impact, types and sources of contamination and suggests possible remedies and prevention.

Dopak Sampling
Safety of the Environment
Safety of the Operator
Closed Vent Sampling
-Dopak has set the worldwide standard in sampling systems providing safety for the operator with zero contact to the sampled product, providing safety for the environment with no spillage or fumes and providing 100% representative sample.

Marsulex Inc.
Sulphur & Coke Handling Maintenance Model
- Marsulex has designed total cost of maintenance model that delivers deeper understanding of sulphur solids handling systems and their operating and maintenance requirements. Model outputs include optimal PM program with review of costs of sub-optimal operation.
 Abstract

CSI - Controls Southeast Inc
Busting Myths Which Pervade
the Design of Steam Heating Systems!
- CSI reviews sulfur industry design myths demonstrated by real-life events. Each event shows how an incorrect belief led to actual cost and/or performance issues. End users will benefit from engineering design solutions to maximize process requirements.
 Abstract

Aspen Aerogels
Flexible, durable insulation for the Sulfur Complex
- Insulation products that meet the most demanding requirements and span the entire service temperature range from -460°F (-270°C) to 1200°F (650°C). 

Callidus Technologies by Honeywell
Sulfur Tail Gas Thermal Oxidizer Systems
- Special considerations in the design and of Sulfur Tail Gas incinerators are discussed with special emphasis on common misunderstandings about sulfur tail gas incinerators and design pitfalls to avoid.

Koch-Glitsch Canada LP
Internals for Reliability and Improved Performance
- Fuel gas absorber was revamped to increase capacity while maintaining H2S product quality well below specification. Collaboration between process and equipment professionals created a workable solution within constraints of the plant and shutdown schedule.

Sulfur Recovery Engineers
Performance Evaluation
- Testing and Performance evaluation of the Sulfur Recovery Unit.

BSDT Seminars

Troubleshooting an Amine Unit

This list below describes presentations from the previous SulfurUnit seminar. Look here for Coker track presentations.  The first Call for Presentations went out May 17. As papers are approved they will be listed above.

Journey to Zero Injuries
-Compelling stories of industrial plant construction and what has led us to be proponents of the Zero Injury Concepts.

Refractory Lining Improvements for O2 Enriched Furnace Service 
-Project philosophy used to assure implementation of new refractory design features. Describes technical improvements to lining system. Experiences and perspectives of three parties: process licensor, owner-Refiner, contractor.

Treatment Options for Molten Sulfur Storage and Transfer Vents
-Molten sulfur has complicated handling, storage & transfer issues. User must define requirements, work with provider that will design and implement a system that meets economic, safety, regulatory, and process requirements in an integrated package.

In-house Control Integrated System for Accidental H2S Leak in Oil Refineries
-The maintenance of safety in Oil Refineries, regarding accidental H2S leaks to the atmosphere. The principal strategy is the local sheltering to named Safety Units. Three models of these Safety Units have been developed to deal with this kind of emergency.

Reducing Differential Pressure - Amine Regenerator
-Company worked together with LyondellBasell to develop a plan that reduced differential pressure in the Regenerator tower by 50% and returned rich amine feed rate to plan in less than 8 hours using Strategic Chemistry.

Optimizing refinery amine system performance without capital
-Many amine systems faced additional large capital expenditures for regeneration equipment. Upgrading amine solvent to formulated MDEA products allowed units to maximize amine circuit efficiency with solvent & operation approaches for cost savings.

Continuous Evolution of Technology Delivers Safety and Performance Improvements
-Traditional approaches to Clear for Entry, Fouling Removal from Exchangers/Reactors, Waste Removal/Waste Treatment; then introduction of advanced technologies/methods for safe and fast results. Case studies validate technologies, lead to best practices.

Sulfur Unit Decontamination to Facilitate Maintenance
-Company has developed methodology to conduct equipment decontamination on sour water strippers, Claus units, tail gas and amine units. Several case studies showing successful, efficient decontaminated of these process units will be presented.

Capacity for in-Ground Reinforced Concrete Sulfur Pits
-Sulfur Pits & Dealing with Changes: Strategies and Case Histories will be detailed to provide insight into the Industry's "Best Practices" regarding changes in Sulfur Storage and Containment, thus meeting Owner/Operator "Opportunities."

80 Days to Operator Competency
-Operator competency, the existing gap between capabilities and demands, the consequences of that gap and methods for closing the gap.

This company meets EPA Challenges
-Company practices environmental prevention through their newest product.

If you can prevent one incident, you've got your money's worth from this presentation alone. This will be a highlight of the conference.

Listen to owners and end users comment on YouTube

Breakout Discussion Groups

We know that you like to hear how other refiners are handling safety situations and solving operations challenges, so we offer these Breakout Discussion Groups focused on:

• Safety

• Operations

• Maintenance/Reliability

• Process

• Amine (Tuesday only)

Find out how to present

We'll add papers as they are confirmed.  We are ALWAYS open to additional presentations, near misses and shared learnings by refiners and gas processors. 

Conference Schedule

Check out the Exhibits more >>

Register and Pay here with

 

Check back later; presentations will be listed above that we are considering.  If you are interested in presenting, review the Call For Presentations and contact us.

Send mail to CompanyWebmaster with questions or comments about this Sulfur Unit (www.SulfurUnit.com) web site.
© Copyright: July 19, 2009